Portable Transmission Densitometer
Overview
Portable Black & White Transmission Densitometer
- Compact & High Performance (0.00D-6.0D)
- Supports measurement of Density, Positive Dot Area%, Negative Dot Area%, Transmittance
- Easy operation
- Accuracy check is possible with confirmation film
FEATURES
High performance and easy operability
Small portable and high performance. The measurement is possible just to push down an arm.
Measurement of A3 size film
T5 plus is possible to measure up to the center part of A3 + size film.
Connectable to PC etc.
Since the main body has an RS – 232C output terminal, it is possible to transfer data with one cable.
PRODUCT SPECIFICATIONS
Dimensions
251mm(D)x103mm(W)x125mm(H)
Light Table
8Omm(W)x70mm(D)
Weight
1.2kg Approximately 1,200g
Power Source
- ACP5J99V-500mA, y4.8V
- AC adapter 9V-500mA
- Built-in Rechargeable Battery 4.8V
Aperture
3mm.2mm.lmm
Measuring Range
0.000~6.00 100% ~ 0.0001% %0.0~100.0% Density 0.000~6.00, Transmittance 100%~0.0001% Dot Percentage 0.0 ~ 100.0%
Repeatability
+0.01D (at<4.0D, 3mm PIS-F+) +0.01D (at<4.0D, 33mm aperture)
Fringe correction
Supported
Optical System
ANSI PH2.19(Specular-Diffuse)
Filter characteristics
Visual
Light Source
Halogen Lamp
Detector
Filter. Built-in Photo Diode
Interface
RS-2320 (9,600bps, – 8bits, RS-232C(9,600bps, 8 Data bits, Non Parity. 1 Stop bit)
Warm Up Time,
None
Accuracy
+0.02D (at<4.0D, 3mm PIS-Ft) +0.02D (at<4.0D.3mm aperture)
Display
LCD8 8 characters LCD
Operating Temperature Range
5~40°C
Standard Accessories
PIS-F+03mm.02mm. 1mm
AC100V7. ( ) Aperture Calibration film,Confirmation film, AC 100V Adapter. Instruction Manual
Calibration
IT- TITLESS ZO-J(2)IIE
One touch zeroing operation, Slope (2 points) calibration using air and calibration film, It is possible to check the need for calibration with confirmation film.